Cooling broach used unique geometrical appearance design inside the ICe-Carb that company of American SGS cutting tool develops, improved cooling current and performance of bits of cutting tool platoon, can use taller cutting parameter at the same time, realize the better control that cut bits. The high quality that this broach basically is metal of alloy of high temperature of steel of stainless steel, alloy steel, cast-iron, mild steel, tool, Inconel and titanium is machined and design, one of its characteristics are the good protection that get a tip, prolonged cutting tool life thereby. The norms of cooling broach inside ICe-Carb is 3 - 16mm, its are gotten cut deepness to be able to amount to 7 times aperture. In most treatment, this broach need not be used " peck attack " type treatment. All broach use Ti-NAMITE-A of SGS company proprietary (AlTiN) cutting tool coating, this coating can be gotten in deep aperture taller thermal stability and wearability are offerred in cutting. Headquarters of company of SGS cutting tool is located in American Ohio, hard alloy of whole of special development production rotates cutting tool. CNC MillingCNC Machining